Specifications
Fuel:
Wood pellets and biomass pellets
Maximum Input Capacity: 120,000 BTU (36 kW)
Maximum Output Capacity: 108,000 BTU (32 kW)
Minimum Input Capacity: 18,000 BTU (6 kW)
Minimum Output Capacity: 16,000 BTU (5 kW)
Efficiency: 81.2%
Test Standard Emissions: EPA
Blower: G10 blower with 1.5 hp motor - theoretical 1650 CFM (max 0.20" WC) - 4 speeds
Ignition type: Electronic
Temperature Control: Thermostatic
Loading Capacity: 240 lbs
Combustion autonomy on Maximum: 17 hours
Average Combustion Autonomy: 30 hours (thermostatic cycling at 120,000 BTU
Type of Door: Glass with cast iron frame
Color: Green
Exterior Dimensions: 26.25"W x 56.25"D x 47"H
Recommended Exhaust Pipe Diameter: 4"
Venting System: Pellet vent approved for UL-641 / ULC S-609-M89
Hot Air Plenum Dimensions: 22"W x 22"D
Cold Air Plenum Dimensions: 16 1/8"W x 21 5/16"D
Ash Drawer Dimensions: 19 15/16"W x 14"D x 7 3/4"H
Number of Filters: 1
Filter Dimensions: 16" x 20"
Weight: 500 lbs.
Warranty: Limited lifetime
Test Standard (Safety): CAN/CSA B366.1, UL 391, CAN/CSA C22.2 no 236, UL 1995, ASTM E1509, ULC/ORD-C1482
Test Standard: EPA

Electrical Element  (Optional)
Recommended Element: 1500 kW or 20 kW
Element Location: Left or right

Optional Hot Water Loop Kit for Pre-heating domestic water
Connection Locations:
Left or right
Connecting Pipe Diameter: 3/4"
Backup Tank Volume: 60 gallons

Minimum Clearances to Combustibles

Front: 48"
Back: 24"
Sides:
4" (pellet only) and 24" on the option side
Ducts: 2" for the first 5', and 0" thereafter

*Square-feet heating capacities are approximations only. Actual performance may vary depending upon home design and insulation, ceiling heights, climate, condition and type of fuel used, appliance location, burn rate, accessories chosen, chimney installation and how the appliance is operated.